SiNH Hybrid Coat by Innovacar is a water-repellent nanotechnological treatment for cars latest generation professional developed with the exclusive Innovacar Si-N-H technology.

This ceramic coat represents the optimal solution to obtain the right balance between the inorganic part, typical of base coats, which strengthens the protection and makes the treatment more resistant and the organic part, typical of top coats, which instead increases the effects of water repellency.

With the use of a single product and in a single application step you get both advantages speeding up your work and obtaining the benefits of a complete nanoceramic treatment.

The main features *:

• Water-repellent and self-cleaning capacity: thanks to its water-repellent, antistatic and dirt-repellent effects, it makes reduced and easier maintenance possible.
• Long lasting certified: the tests carried out in certified external laboratories monitored the variations of gloss (ISO 20566: 2013) and hydrophobicity of the surface both in automatic and manual washing cycles, confirming a duration up to about 4-5 years (75,000 km or up to 72 washes-car washes).
• Does not require IR lamps: has a rapid drying time of approximately 20 minutes at room temperature (23 ° C) and 50% humidity, making it applicable even without the use of IR lamps.
• Easy to use: is a professional ceramic treatment, but it is easy to use and apply compared to category products.
• Regeneration: with high temperatures, for example under the sun and in summer it allows the self-repair of micro-scratches.
• Absorbs shocks better: simulates the effect of the PPF protective film to absorb shocks and cause less damage, especially if layered 2-3 times.
• Resistance to abrasion: through tests carried out in external and certified laboratories, which replicate a washing in an automatic car wash with the use of an alkaline pre-wash and quartz powder, it emerged that guarantees double the abrasion resistance compared to an untreated surface according to ISO 20566: 2013.
• Greater resistance to washing: thanks to its peculiarities and the tests carried out it is resistant to manual or automatic washing cycles.
• Gloss and color depth: enhances the depth of color and has a gloss effect that enhances the splendor of the bodywork.
• Protection against atmospheric events: the treated surface is resistant to UV rays, corrosion and high temperatures.
• Suitable for different surfaces: can be used on the bodywork, rims, aluminum, steel and plastics.
• Suitable for matt paints, PPF and wrapping: is also suitable for use on matt paints, PPF protective films or machines and wrapped media.
• Suitable for all types of vehicles can be used on cars, motorcycles, bicycles and boats.
• Safety: is PFAS free and compliant with the content of volatile organic components (VOC) according to directive 2004/42 / CE and with the analysis method compliant with UNI EN ISO 11890-1: 2008.

Average consumption : 30 ml per machine.

Summary technical data:

• Technology : Si-N-H + Resin
• Hardness : Medium / Hard -7H
• Flexibility - elasticity : 4/5
• Beading - contact angle : 4/5 (increases the contact angle by about ≃ + 15%)
• Depth of gloss : 4/5
• Self-cleaning capacity : 4/5
• Ease of use : 5/5
• Self-repair with heat : 4/5
• Resistance to limestone : 4/5
• Resistance to abrasion : 4/5 (+ 100%)
• UV protection : 5/5
• Temperature resistance : 600 ° C
• Product consumption : 3ml / m2
• Layer thickness : 1000-3000 nm
• Duration years ** : up to 4-5 years
• Manual washing duration * : over 72
• Duration of automatic washing * : over 60

HOW TO APPLY SINH HYBRID COAT:

We recommend:

• Apply the product preferably in an environment with a controlled temperature between + 5 ° C and 25 ° C and free from contamination and with controlled humidity
• Apply the product in a well-lit environment.
• Replace Micron Suede often.
• Use Micron 2F: the short-haired part to remove 80-90% of the product and the long-haired part to finish.
• Replace Micron 2F often, on average every 2 panels.
• Do not treat the surface with dirty or worn cloths.
• For maximum efficiency use only Innovacar maintenance products.

Phase 1 - Preparation of the car (to be carried out if not already performed):

1. Perform a prewash with SP1 Prewash or similar products.
2. Wash with S2 Foamy to clean the surface.
3. Carry out the chemical decontamination of the surface from tar with D3 Tar, from ferrous residues with D1 Iron and from limestone with DS Scale.
4. Proceed with the mechanical decontamination with Clay Bar (or Clay Mitt), with the help of DL Lube.
5. If necessary, polish the car in order to correct defects and obtain a perfectly smooth surface.
6. Remove any traces of residual oils with D2 check.
7. Visually check the car to make sure it is perfectly decontaminated and clean and therefore ready for application of the protective.

Phase 2 - Application of the ceramic:

1. Shake SiNH Hybrid Coat.
2. Apply a few drops of SiNH Hybrid Coat on the Micron Suede wrapped around the Foam App Block.
3. Proceed by applying the product with the Criss-Cross method (at least 3 times), treating one panel at a time (about 50x50 cm).
4. Allow to cure for at least 30 seconds (with high ambient temperatures) and up to a maximum of 2 minutes (with low ambient temperatures), before removing excess product by smoothing with a Micron Buffing cloth, if necessary.
5. In case of incorrect removal of excess product, within 10 minutes, it is possible to reapply the product smoothing the surface.

Phase 3 - Cross-linking of the protective barrier:

1. After 4 hours, proceed directly with the final application of SC0 Hydro Sealant. The latter represents the protective layer aimed at preserving the surface during the complete Curing period.
2. Wait 3-4 hours before exposing the vehicle outside and 7 days before exposing it to snow / rain or carrying out a first wash, as suggested in the Innovacar maintenance program.

Precautions: Use within 6 months of opening, carefully closing the bottle after use and storing the product in a dry environment away from light and heat and with a temperature between 5 and 25 ° C Always refer to the MSDS and the precautions and indications given on the labeling. Always follow the Innovacar Cyclic System to obtain maximum performance and longer life;