How to restore cloudy headlights

STOP MATTE CAR HEADLIGHTS!

The headlights of modern cars are made of polycarbonate plastic, they, over time, are subject to becoming opaque , caused by the potentially dangerous accumulation of oxidation or the use of unsuitable detergents, thus also leading to poor lighting and a danger while driving at night.

It is possible, however, to restore yellowed headlights and have headlights like new.

LET'S SEE HOW TO RESTORE A MATT OR RUINED HEADLIGHT

1. Wash the headlights with water and neutral pH soap (specific for cars).
2. Mask the parts of the bodywork adjacent to the headlight with tape
3. Sand the headlight with body shop water-based paper 400, 600, 1000, and 1500, until the yellowed clear coat is completely eliminated, taking care to start with the most aggressive paper if the headlight is very damaged and taking care to carry out a correct grain scaling
4. Add the headlight renewer polymer inside the vaporizer cup and close with the supplied lid
5. Connect the power supply and leave to heat for at least 5-6 minutes, until steam comes out. Do not leave connected for more than 20 minutes
6. Begin to spray the product directly on the headlight at a distance of 1 cm, taking care to start from the lower part of the headlight, until the headlight becomes totally shiny. Be sure to keep your face (protected with a mask) away from the vaporizer during the operation
7. Turn off and leave to cool for at least 15 minutes. You can then put the unused polymer back into the bottle.

You can purchase everything you need in our headlight polishing kits !