How to apply car wax or sealant?
How to apply car wax or sealant?
Apply the wax or sealant to the shade. If the product dries too quickly, it can be difficult to remove the excess. Always apply wax or sealant to dry surface, water droplets on the paint will increase the difficulty of polishing.
Thin, thin, thin! Apply as thin a layer as possible. Overdoing it just makes the wax or sealant difficult to remove. Make circular movements back and forth or up and down .. the important thing is to apply it evenly.
Once you have passed the wax and waited for 15 to 20 minutes, remove the excess with Innovacar Micron Buffing or Profipolish Super Soft Gray .
To make sure it is the right moment, do the test with a finger, if the surface appears shiny and dry when the finger passes, then it is possible to proceed with the removal, otherwise it is advisable to wait a few more minutes.
If once you have waxed the whole car and removed the residual wax, if some streaks remain or you notice an uneven shine, you can use Wowo's Quick Detailer with Profipolish Korea Super Plush clean to have a smooth surface.
Tips:
- Carnauba waxes usually last 3 to 8 weeks
- Apply the wax in thin layers, as only a light layer will remain on the varnish
- Generally you have to wait 12 to 24 hours for solidification
- We recommend working in the shade when applying o remove the wax
- Most waxes give the intensity and shine at their best when applied in multiple layers
- When the wax stops sliding off the water, it's time to apply a new layer
